LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 199 (Air Conditioning (Heating, Ventilation And Air Conditioning - A/C Compressor - Display Control Head)) >> 87 Air Conditioning >> Front Heater And A/C Unit >> Fresh Air Blower -V2- WITH Fresh Air Blower Control Module -J126-, REMOVING AND INSTALLING >> Installing

Fresh Air Blower -V2- WITH Fresh Air Blower Control Module -J126-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

-- Check the air intake manifold -C- via the shaft for the Fresh Air Blower -V2- -B- for contamination and clean if necessary.

-- When installing, make sure the Fresh Air Blower -V2- -B- fits correctly in air intake manifold -C-.