Rear A/C Display Control Head -E265-, REMOVING AND INSTALLING, "High" A/C SYSTEM, A4 AND A5: Installing

WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

When replacing a Rear A/C Display Control Head -E265- -B-, ensure the exact allocation. Refer to the Parts Information.
Check the clamps -E- are seated correctly on the Rear A/C Display Control Head -E265- -B-

-- Retrieve the Front A/C Display Control Head -E87- DTC memory and delete the displayed error if necessary. Use the Vehicle Diagnostic Tester.