Input Shaft Seal, Replacing, Clutch Cover: Removing
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
- The clutch is installed.
CAUTION:
There is a risk of damaging the clutch from mishandling.
- The shaft seal can only be replaced when the clutch is installed.
-- Remove the flywheel. Refer to FLYWHEEL, REMOVING AND INSTALLING .
-- Pry out the shaft seal -arrow- carefully with the Puller - Crankshaft/Power Steering Seal:T20143 .
- Do not damage the contact surface on the shaft.