Bumper Cover, Removing And Installing: Notes
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
- To complete the procedure, a second technician is required to be at the following position. Refer to Removing => Disengage the side piece from the front side panel -arrow A- and remove the bumper cover -3- slightly with the help of a second technician -B arrows-. .
- Depending on the equipment version, the following additional work must be performed. Refer to Depending on the version, the following additional work is required: .
Special tools and workshop equipment required