Rear Noise Insulation

WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

Removal Procedure:

-- Detach the expanding clips -arrows-.

Fig 1: Rear Noise Insulation

Courtesy of AUDI OF AMERICA, LLC

-- Detach the quick-release fasteners -2- and -3-.

-- Remove the noise insulation -4- toward the rear.

Installation Procedure:

Installation procedures occur in reverse order.

NOTE:

When installing, the quick-release fasteners must noticeably engage!