Calibration Unit:VAS6350A, INSTALLING AND ALIGNING: Notes
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Calibration Unit:VAS6350A
- Vehicle Diagnostic Tester
After performing repair work on the vehicle, it may be necessary to re-calibrate the rearview camera system. Specifically, this is the case after:
- Rearview Camera -R189-, REMOVING and Installing
- Collision repairs on rear lid
- Changes to the axle alignment on the rear axle