Antenna Amplifier 3 -R112-, REMOVING AND INSTALLING, AVANT/ALLROAD: Removing
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment and remove the ignition key.
-- Remove the C-pillar trim panel. Refer to C-PILLAR TRIM PANEL, REMOVING AND INSTALLING .
-- Release and disconnect the connectors -2- and -5- from the Antenna Amplifier 3 -R112- -1-.
-- Loosen the screw -3- several turns and remove the Antenna Amplifier 3 -R112- -1- from the C-pillar -4-.