Oil Pan Upper Section, Removing And Installing: Notes

WARNING: This page is about a different car, the 2024 Audi RS 3. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Seal Installer - Valve Stem Seal Tool Adapter Plates :2036/1 from the Seal Installer - Valve Stem Seal Tool :2036

Fig 1: Identifying Adjustable Rod 2036
Courtesy of AUDI OF AMERICA, LLC
Locking Pins :T03006

Fig 2: Locking Pins
Courtesy of AUDI OF AMERICA, LLC
Counterhold - Multiple Use :T10172A with Counterhold - Multiple Use - Adapter :T10172/9

Fig 3: Counterhold - Kit - Multiple Use T10172
Courtesy of AUDI OF AMERICA, LLC
Crankshaft Locking Pin :T40069

Fig 4: Crankshaft Locking Pin T40069
Courtesy of AUDI OF AMERICA, LLC
Crankshaft Adapter :T03003A

Fig 5: Crankshaft Adapter T03003
Courtesy of AUDI OF AMERICA, LLC
Protective Eyewear
Sealant. Refer to the Parts Information.
Cleaning set for sealing surfaces :VAS 294 019

Courtesy of AUDI OF AMERICA, LLC

Prepare the Crankshaft Adapter :T03003

Courtesy of AUDI OF AMERICA, LLC

-- When only the tool Crankshaft Adapter :T03003 is available the pins -1- must be separated at the mark -arrow- so that it can be placed on the vibration damper.