Right Coolant Pipe, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi RS 3. However, it is still accessible from the selected car via links, so may be relevant.
-- Free up the fuel hose and hose for the EVAP system.
-- Remove the bolt -2- and the nut -3-.
-- Place a cloth underneath to catch escaping coolant.
-- Loosen the hose clamps -1 through 4-, then clamp off the coolant hoses with the Hose Clamps - Up To 25mm :3094 and remove them.
-- Remove the right coolant pipe.