Front Coolant Pipe, Removing And Installing, From 08/2017: Installing
WARNING: This page is about a different car, the 2024 Audi RS 3. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- Replace the O-ring after removal.
- Secure all hose connections with hose clamps that match the ones used in series production. Refer to the => Parts Information.
-- Install the intake manifold upper section. Refer to INTAKE MANIFOLD UPPER SECTION, REMOVING AND INSTALLING .
-- Install the upper left coolant pipe. Refer to UPPER LEFT COOLANT PIPE, REMOVING AND INSTALLING, FROM 08/2017 .