Overview - Exhaust Temperature Regulation
WARNING: This page is about a different car, the 2024 Audi A3 Quattro and 2024 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Shown on a vehicle with AWD.
- Exhaust Gas Temperature Sensor 4 -G648-
- Removing and Installing. Refer to EXHAUST TEMPERATURE REGULATION COMPONENTS, REMOVING AND INSTALLING .
- 45 Nm
- Particulate Filter Differential Temperature Sensor -GX41-
- Removing and Installing. Refer to EXHAUST TEMPERATURE REGULATION COMPONENTS, REMOVING AND INSTALLING .
- Nut
- Exhaust Gas Temperature Sensor 3 -G495-
- Removing and Installing. Refer to EXHAUST TEMPERATURE REGULATION COMPONENTS, REMOVING AND INSTALLING .
- 45 Nm
- Oxygen Sensor 1 after Catalytic Converter -GX7-
- Oxygen Sensor 1 Before Catalytic Converter -GX10-
- Bolt
- Tightening Specification. Refer to OVERVIEW - HEATED OXYGEN SENSOR => List Item:Bolt .
- Particulate Filter Differential Pressure Sensor -G1037-
- Removing and Installing. Refer to OVERVIEW - HEATED OXYGEN SENSOR => List Item:Particulate Filter Differential Pressure Sensor -G1037- .
- Bracket
- With control lines
- Bolt
- Tightening Specification. Refer to OVERVIEW - HEATED OXYGEN SENSOR => List Item:Bolt .
- Bolt
- Tightening Specification. Refer to OVERVIEW - HEATED OXYGEN SENSOR => List Item:Bolt .
- Bracket
- Union Nut
- Tightening Specification. Refer to OVERVIEW - HEATED OXYGEN SENSOR => List Item:Union Nut .
- Union Nut
- Tightening Specification. Refer to OVERVIEW - HEATED OXYGEN SENSOR => List Item:Union Nut .