Procedure Version 1

WARNING: This page is about a different car, the 2024 Audi A3 Quattro and 2024 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Select the required "Guided Function". The entry in the Vehicle Diagnostic Tester is always the same.

-- Connect the Vehicle Diagnostic Tester.

-- Select Diagnostic operating mode and Start diagnostics .

-- Select the Select individual test tab and select the following tree structure consecutively:

Adapting the adaptation values after replacing components

Drivetrain
Select the engine code and engine
0001 - OBD-capable systems
0001 - Engine Electronics
0001 - Engine electronics, functions

Replacing the engine/motor control module:

0001 - Replacing the engine control module

-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.