Muffler, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi RS 3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the tunnel brace. Refer to TUNNEL BRACE, REMOVING AND INSTALLING .
-- Loosen the threaded connections on the clamping sleeves -1 and 2-.
-- Disconnect the left and right connector -2- from the exhaust door control unit.
CAUTION:
Risk of accident due to the heavy weight of the muffler.
- A second technician is required for the following work steps.
-- Disengage the retaining loop -4-.
-- Remove the bolts -1 and 3- and remove the muffler (example illustration).