Overview - Exhaust Door Control Unit
WARNING: This page is about a different car, the 2024 Audi RS 3. However, it is still accessible from the selected car via links, so may be relevant.
- Muffler
- Spring
- Installation position. Refer to Fig 2.
- Exhaust Door Control Unit
- Exhaust Door Control Unit -J883- right
- Exhaust Door Control Unit 2 -J945- left
- Removing and Installing. Refer to Exhaust Door Control Unit -J883- / Exhaust Door Control Unit 2 -J945-, REMOVING AND INSTALLING .
- Installation position. Refer to Fig 2.
- After replacing components, perform the adaption listed in 0001 - Mechanical Engine, Functions program J883 J945 using the Vehicle Diagnostic Tool.
- Bolt
- 9 Nm
- Replace after removing
Installation Position of the Exhaust Door Control Unit.
-- Bring the spring -3- at the exhaust door -2- into the installation position.
-- Place the exhaust door control unit -1- onto the exhaust door in direction of -arrows-.