Vibration Damper, Removing And Installing: Notes
WARNING: This page is about a different car, the 2024 Audi RS 3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Crankshaft Locking Pin :T40069
- Crankshaft Adapter :T03003A
Prepare the Crankshaft Adapter :T03003
-- When only the tool Crankshaft Adapter :T03003 is available the pins -1- must be separated at the mark -arrow- so that it can be placed on the vibration damper.