Sub-Assembly Bracket, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi RS 3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the ribbed belt tensioner. Refer to RIBBED BELT TENSIONER, REMOVING AND INSTALLING .
-- Remove the engine mount. Refer to ENGINE MOUNT, REMOVING AND INSTALLING .
-- Remove the fan shroud. Refer to FAN SHROUD, REMOVING AND INSTALLING .
-- Remove the A/C compressor. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING ON BRACKET .
-- Remove the generator. Refer to GENERATOR, REMOVING AND INSTALLING .
-- Free up the Mechanical Coolant Pump Switch Valve -N649- -arrow A-.
-- Remove the bolts -B arrows- and remove the bracket for the Mechanical Coolant Pump Switch Valve -N649-.
-- Remove the bolts -1 to 6- and remove the sub-assembly bracket.