Sensor Wheel, Removing And Installing: Installing
WARNING: This page is about a different car, the 2024 Audi RS 3. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
CAUTION:
Do not place the sensor wheel near magnets (for example lamp base, speakers).
There is a risk of destroying the sensor wheel by magnetic force.
- Before installing the drive plate/flywheel or sensor wheel, check the function of the sensor wheel.
-- Install the flywheel. Refer to FLYWHEEL, REMOVING AND INSTALLING .
-- After removing or replacing the sensor wheel, perform the adaptation using the => Vehicle Diagnostic Tester , 0001 - Engine electronics, functions , J623 - Engine electronics, functions