LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Engine Assembly (5-Cylinder Direct Injection 2.5L 4V TFSI Engine)) >> 10 Engine Assembly >> Assembly Mounts >> Pendulum Support, Removing And Installing >> Removing

Pendulum Support, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi RS 3. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Engine Support Component Location
GWWA10-11615Courtesy of AUDI OF AMERICA, LLC

-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .

-- Remove the bolts -1, 2 and 3- and remove the pendulum support.