Auxiliary Radiator, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi RS 3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .
-- Remove the left front wheel housing liner. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .
-- Carefully unclip the air routing -4- from the radiator and leave in installation position.
-- Place a cloth underneath to catch leaking coolant.
-- Clamp off the coolant hoses using the Hose Clamps - Up To 25mm:3094 .
-- Loosen the clamps -2- and remove the coolant hoses and free up on the hose bracket -3-.
-- Remove the nuts -arrows- and remove the auxiliary radiator -1- with the bracket.
-- Remove the auxiliary radiator -1- upward from the bracket -2- in direction of -arrow B- then push it upward in direction of -arrow A- and remove.