Rear Bumper Trim Molding, Removing And Installing: Removing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the lower section of the bumper cover. Refer to BUMPER COVER LOWER SECTION, REMOVING AND INSTALLING, RS3 .
-- Release the retainers -arrows- and remove the side trim molding -1-.
-- Release the retainers -arrows- and remove the center trim molding -1-.