Overview - Final Drive

Fig 1: Exploded View Of Final Drive

Courtesy of AUDI OF AMERICA, LLC

Bolt
- 60 Nm +180°
- Always replace after removing
- Quantity: 3
Stop Washer
- Place on the bonded rubber bushing. Refer to Figure.
Washer
- Installation position: the bevel (small diameter) faces the subframe
Bolts
- 60 Nm +180°
- Always replace after removing
Rear Subframe
Stop Washers
- Place on the bonded rubber bushing. Refer to Figure.
Rear Final Drive
- Removing and Installing. Refer to FINAL DRIVE, REMOVING AND INSTALLING .
- Bonded Rubber Bushing, Removing and Installing. Refer to OVERVIEW - ASSEMBLY MOUNTS .