Procedure Version 1

WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Select the required "Guided Function". The entry in the Vehicle Diagnostic Tester is always the same.

-- Connect the Vehicle Diagnostic Tester.

-- Select Diagnostic operating mode and Start diagnostics .

-- Select the Select individual test tab and select the following tree structure consecutively:

Adapting the adaptation values after replacing components

Drivetrain
Select the engine code and engine
0001 - OBD-capable systems
0001 - Engine Electronics
0001 - Engine electronics, functions

Replacing the engine/motor control module:

0001 - Replacing the engine control module

-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.