Input Shaft Seal, Replacing: Notes

WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Press Piece - 37mm:VW416B

Courtesy of AUDI OF AMERICA, LLC
Puller - Seal Lever:VW681

Courtesy of AUDI OF AMERICA, LLC
Counterhold - Crankshaft Sprocket:3415

Courtesy of AUDI OF AMERICA, LLC
Torque Wrench 1601:V.A.G 1601

Courtesy of AUDI OF AMERICA, LLC
Used Oil Collection and Extraction Unit:SMN372500

Courtesy of AUDI OF AMERICA, LLC
Three-Arm Puller:VAS 251 201 or Puller - Kukko 3 Jaw - 100x100mm:VAS251201

Courtesy of AUDI OF AMERICA, LLC
Seal Installer - Shaft Seal Ring:T10019

Courtesy of AUDI OF AMERICA, LLC
Counterhold - Kit - Multiple Use:T10172A with Counterhold - Kit - Adapter 5:T10172/5

Courtesy of AUDI OF AMERICA, LLC
Locking Fluid:D 000 600
M10 x 25 Bolt
M8 x 15 Hex Socket Bolt