Rear Center Console Vent, Removing And Installing: Removing
WARNING: This page is about a different car, the 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the front seats all the way forward.
TIP:
The vent has a hole -2- on both sides for attaching the Hook Tool:T40207 .
-- Carefully insert the Hook Tool:T40207 between the slats and hook it into the side of the vent.
-- Remove the vents -1- on both sides alternating from side to side -arrows-.
-- Unclip the vent at the bottom from the center console and remove from the installation opening.
-- Disconnect the connectors.