Spoiler, Removing And Installing, SPORTBACK: Installing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Clean the adhesive surface on the rear lid using the Cleaning Solution and let it dry.
-- Check the foam seals -1 through 6- for damage.
- The foam seals -1 through 6- must rest on the clips, securing tabs, threaded pins and the spoiler.
-- Place the spoiler on the rear lid and push it in until it engages audibly.