Control Module Bracket, Removing And Installing: Removing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the driver side instrument panel cover. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .
-- Free up the wiring harness.
-- If installed: remove the parking aid control module/parallel parking assistance control module. Refer to PARKING AID CONTROL MODULE -J446-, REMOVING AND INSTALLING .
-- To loosen the retainers, insert the feeler gauge 0.9 mm -item 2- into the opening -arrow- as shown.
-- Remove the bracket -1- downward from the bracket for the vehicle electrical system control module -3-.