Left A-Pillar Connector Station, Removing And Installing: Removing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the A-pillar lower trim panel. Refer to A-PILLAR TRIM PANEL, REMOVING AND INSTALLING .
-- Release the retainers -arrows- and disengage the connector station -2- at the A-pillar.
-- Disconnect the connectors -1-.
-- Release the retainer -3- -arrow- and push the connector terminal -2- out of the bracket -1-.