Fan Shroud, Removing And Installing, AUDI A3 From My 2021/Q2 From My 2016: Removing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .
-- Loosen the hose clamps -1 and 2- and remove the air duct hose.
-- Seal the open lines and connections with clean plugs from the Engine Bung Set:VAS 6122 .
CAUTION:
There is a risk of injury if the radiator fan turns on by itself.
- Disconnect the connectors.
-- Disconnect the radiator fan connector -1- by sliding the retainer back in the -direction of the arrow A- and pressing the release downward.
-- Press the left and right fan shroud locking tabs at the same time -arrow B- and disengage and remove the fan shroud upward from the radiator.