Overview - Engine/Motor Coolant Temperature Sensor
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Clip
- Check for secure fit
- O-Ring
- Replace after removing
- Coat with coolant
- Engine Coolant Temperature Sensor on Radiator Outlet -G83-
- Removing and Installing. Refer to Engine Coolant Temperature Sensor on Radiator Outlet -G83-, REMOVING AND INSTALLING .
- O-Ring
- Allocation. Refer to Fig 2.
- Coat with coolant
- Centering Ring
- Allocation. Refer to Fig 2.
- Coat with coolant
- Bolt
- Replace after removing
- 4 Nm +45°
- Engine Coolant Temperature Sensor -G62-
- on transmission side of the cylinder head
- Removing and Installing. Refer to Engine Coolant Temperature Sensor -G62-, REMOVING AND INSTALLING .
Allocation of the O-ring/centering ring
- Check the centering ring -1- for damage, if it is, then replace the engine coolant temperature sensor.
- Always replace the O-ring -2- after disassembly.