Coolant Pump, Removing And Installing: Installing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- Replace the seal after removal.
- Used coolant cannot be used again.
-- Install the coolant pump -1- and toothed belt.
-- Pay attention that the centering piece -arrows- and seal -3- are seated correctly.
-- After installing a new coolant pump -2-, remove the protective cap -1- from the drive wheel.
-- Install the left air duct pipe. Refer to LEFT AIR DUCT PIPE, REMOVING AND INSTALLING .
-- Fill with coolant. Refer to COOLANT, FILLING USING Cooling System Charge Kit:VAS 6096 [DNNA, DNNB, DNND, DNVB] .