Coolant Pump Toothed Belt, Removing And Installing: Installing

WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

Note the toothed belt sprocket installation location OVERVIEW - COOLANT PUMP/COOLANT THERMOSTAT.

-- Install the windshield washer fluid reservoir. Refer to WASHER FLUID RESERVOIR, REMOVING AND INSTALLING .

-- Install the Oil Pressure Switch, Level 2 -F446-. Refer to Oil Pressure Switch, Level 2 -F446-, REMOVING AND INSTALLING .

-- Install the fan shroud. Refer to FAN SHROUD, REMOVING AND INSTALLING .