Upper Coolant Pipe, Removing And Installing: Removing

WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the cylinder "3" ignition coil. Refer to IGNITION COILS, REMOVING AND INSTALLING .

-- Free up the wiring harness on the clip -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Release the retainers -arrows- and remove wiring duct -3- from bracket.

-- Remove the bolts -2-.

-- Clamp off the coolant hoses using the Hose Clamps - Up To 25mm:3094 .

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the hose clamps -arrows- and remove the coolant hoses.

-- Remove the bolts -1- and remove the upper coolant pipe.