LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Air Conditioning (Refrigerant R1234YF Servicing) (Refrigerant Circuit)) >> 87 Air Conditioning >> Refrigerant Circuit >> Pressure, Checking With Pressure Gauge >> Pressure Gauge Display

Pressure Gauge Display

WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Indicators On Pressure Gauge
GWWV87-1470Courtesy of AUDI OF AMERICA, LLC
  1. Temperature Scale for Refrigerant R1234yf (CF3 CF = CH2 ) in °C
  2. Pressure Scale in Bar Pressure
NOTE:

Pressure is measured in different units: 1 MPa (mega Pascal) corresponds to 10 bar positive pressure or 145 psi. 1 bar absolute pressure corresponds to 0 bar positive pressure and thus to the ambient pressure (atmospheric pressure).

This illustration shows the pressure gauge which shows the pressure on the low pressure side, the display here is in bar pressure (can be recognized by the display "-1").

The pressure gauge may have one or more temperature scales in addition to the pressure scale. The R1234yf scale values are allocated respectively in the vapor pressure table. Since various refrigerants create different vapor pressures at the same temperature, each temperature scale is identified for the respective refrigerant.