Brake Rotor, Removing And Installing, Ceramic Brakes: Removing

WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the brake caliper. Refer to BRAKE CALIPER, REMOVING AND INSTALLING, SIX-PISTON CERAMIC BRAKE .

-- Remove the bolt -1- and remove the brake rotor by hand. Do not use any tools.

Courtesy of AUDI OF AMERICA, LLC

Do not drop the brake rotor.
Do not loosen the brake rotor from the hub by prying.
Do not remove the brake rotor from the hub with a hammer.
If the connection cannot be separated, use rust remover.

If the brake rotor is seized, do the following:

-- Install two M8 bolts -arrows- all the way into the threaded holes of the brake rotor.

-- Tighten the bolts ¹ /₂ turn farther alternating from side to side to loosen the brake rotor from the wheel hub.