Brake Rotor, Removing And Installing, Ceramic Brakes: Installing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Before reusing ceramic brake rotors check for wear and damage. Refer to BRAKE ROTORS, CHECKING, CERAMIC BRAKES .
-- Thoroughly clean the brake rotor and hub contact surfaces and clear them of corrosion.
-- Place the brake rotor on the wheel hub.
- Do not tilt the brake rotor when mounting it on the wheel hub.
-- Tighten the bolt -arrow- to the tightening specification.
-- Install the brake caliper. Refer to BRAKE CALIPER, REMOVING AND INSTALLING, SIX-PISTON CERAMIC BRAKE .
CAUTION:
Faulty brakes increase the risk of an accident.
- Make sure the brakes are working correctly before driving the vehicle for the first time.