Brake Pad Wear Indicator Wire, Removing And Installing, Six-Piston Steel Brake: Installing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
TIP:
If the clip -2- goes missing, the brake pad wear indicator wire must be replaced.
-- Insert the Right Front Brake Pad Wear Sensor -G35- together with the clip into the brake pads until it engages.
-- Secure the brake pad wear indicator wire back into the same position.
-- Connect the connector -1-.