Brake Pad Wear Indicator Wire, Removing And Installing, Six-Piston Ceramic Brake: Installing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
TIP:
If the clip -4- goes missing, the brake pad wear indicator wire must be replaced.
-- Insert the brake pad wear sensor -3- with the retainer until it engages in the brake pad.
-- Secure the brake pad wear indicator wire back into the same positions.
-- Connect the connector -1-.
-- Install the front wheel, while observing the safety precautions for ceramic brakes. Refer to WHEEL, CHANGING .