Brake Caliper, Removing And Installing, Six-Piston Ceramic Brake: Removing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front wheel, while observing the safety precautions for ceramic brakes. Refer to WHEEL, CHANGING .
TIP:
- For easier removal of the brake caliper from the brake rotor, push the brake pads -2- back lightly with suitable pliers -1-.
- To prevent damage to the paint coat on the brake caliper, place a piece of rubber between the pliers and brake caliper.
-- Disconnect the brake pad wear sensor connector -1-.
-- Remove the bolts -arrows-.
-- Carefully remove the brake caliper with the brake pads from the brake rotor.
CAUTION:
There is a risk of damaging the brake hose due to the weight of the brake caliper.
- Never let the brake caliper hang on the brake hose.
-- Hang the brake caliper using a suitable wire.
CAUTION:
There is a risk of damaging the brake caliper piston if handled incorrectly.
- Never activate the brakes if the brake caliper is removed.