Fresh Air Blower Control Module -J126-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the glove compartment. Refer to GLOVE COMPARTMENT, REMOVING AND INSTALLING .
-- Remove the expanding clip -1-.
-- Remove the cover -2-.
-- Disconnect the connectors -1 and 3-.
-- Remove the bolts -arrows-.
CAUTION:
There is a risk of burns from the hot radiating surface of the fresh air blower control module.
It is possible to burn hands.
- Wear safety gloves.
-- Remove the control module -2- from the fresh air blower.