Evaporator Vent Temperature Sensor -G263-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the glove compartment. Refer to GLOVE COMPARTMENT, REMOVING AND INSTALLING .
-- Release the catches in direction of -arrows- by using the Trim Removal Wedge :3409 to pry out the Evaporator Vent Temperature Sensor -G263- -2-.
-- Remove the Evaporator Vent Temperature Sensor -G263- -2- from the housing.
-- Disconnect the connector -1-.