Overview - Belt Pulley, DENSO A/C Compressor
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 4.5 Nm
- Quantity: 3
- Closure Cap
- Nut
- 25 Nm
- Drive Plate
- With overload protection; is activated when the torque is too great (for example, if the A/C compressor runs with resistance) and the belt pulley runs freely without driving the A/C compressor.
- Circlip
- Always replace
- Install on the proper side - the flat side faces the A/C compressor
- Belt Pulley
- There are different versions. Refer to the Parts Information.
- Is sensitive to impact, be careful when handling
- Removing and Installing. Refer to BELT PULLEY, REMOVING AND INSTALLING, DENSO A/C COMPRESSOR .
- A/C Compressor
- Clean the A/C compressor input shaft before installing the belt pulley