4-Cylinder Gasoline Engine 2.0L TFSI
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Removal Procedure:
-- Carefully remove the engine cover from the pins -arrows-, one after another. Do not pull on the engine cover abruptly to remove it or pull on one side.
Installation Procedure
-- To avoid damage, do not hit the engine cover with fist or a tool.
-- Position the engine cover and at the same time, pay attention to the oil filler tube and oil dipstick.
-- Press the engine cover first in the rubber grommets on the left side and then in the rubber grommets on the right side.