Testing Values and Process Specifications Table:
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
| Fastening Element | Tightening Specification [Nm] |
|---|---|
| Wheel bolt A3/S3 | 140 |
| Wheel bolt RS3 | 120 |
The adapter to loosen/tighten the anti-theft wheel bolts is located in the vehicle tool kit.
Procedure:
-- Remove the wheel bolt caps.
-- Tighten the wheel bolts diagonally to the specified tightening specification (for testing values and process specifications table, refer to Testing Values and Process Specifications Table: ).
-- Press the wheel bolt caps on all the way using tool 8Z0.012.287.
-- If the adapter from the vehicle tool kit was used for the anti-theft wheel bolts, put the adapter in the vehicle tool kit.