Instrument Cluster, Checking Indicator Lamps

WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Reading out the DTC memory is a repair procedure and should be charged separately.

Procedure:

-- Start the engine and wait for the vehicle function test to end.

-- Check if the indicator lamps in the instrument cluster turn on.

-- Check the error messages in the driver information system (DSI).

-- Turn off the engine.

-- For the relevant indicator lamps, read out the DTC memory. Refer to DTC MEMORY, CHECKING .

NOTE:

The duration of the vehicle function test depends on the model and vehicle equipment.