Ribbed Belt Pulley Without Freewheel, Removing And Installing: Installing

WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Turn the generator shaft counterclockwise to tighten.

-- Clip protective cap onto generator pulley.

Tightening specification

Component	Nm
Ribbed belt pulley to generator	65