Carbon Brushes, Checking, HITACHI Generator
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Procedure
-- Remove the voltage regulator. Refer to VOLTAGE REGULATOR, REMOVING AND INSTALLING - HITACHI GENERATOR .
-- Check the length -a- of the carbon brushes -1-.
- Wear limit: -a- = 6.5 mm.
-- Install the voltage regulator. Refer to VOLTAGE REGULATOR, REMOVING AND INSTALLING - HITACHI GENERATOR .