LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Seat Upholstery, Covers) >> 74 Seat Upholstery, Covers >> Rear Seat Covers And Cushions >> Side Cushion, Removing And Installing >> Side Cushion Without Thorax Airbag, Removing And Installing, A3 >> Removing

Side Cushion Without Thorax Airbag, Removing And Installing, A3: Removing

WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the bench seat. Refer to BENCH SEAT/SINGLE SEAT, REMOVING AND INSTALLING .

-- Remove the nut -arrow A-.

GWWA74-10816Courtesy of AUDI OF AMERICA, LLC

-- Hold the seat belt webbing to the side and remove the side cushion -1- from the threaded pins.

-- Fold the rear seat backrest slightly forward.

-- Pivot the side cushion slightly to the front in direction of -arrow B-.

-- Pull the side cushion at the bracket -2- out of the mount in direction of -arrow A-.

GWWA74-10839Courtesy of AUDI OF AMERICA, LLC

-- Disengage the hooks -1-, to do that, swivel the side cushions toward the front and at the same time remove downward in direction of -arrow B-.