Cover And Cushion, Removing And Installing, Q3 Seat Cushion: Removing

WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Move the front seats all the way forward.

-- Position the rear seat all the way toward the rear.

-- Unclip the child seat anchor cover -1- from the anchor in direction of -arrow- and remove.

Fig 1: Unclipping Latch Child Seat Anchor Cover -1-

Courtesy of AUDI OF AMERICA, LLC

-- Push the child seat anchor guide -1- downward according to the cut-out, and disengage it from the anchor -2-.

Fig 2: Pushing Latch Child Seat Anchor Guide -1-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the child seat anchor guide forward in direction of -arrow-.

-- Repeat the procedure for the second child seat anchor.

-- Use both hands to grab under the seat cushion -2- on one side.

Courtesy of AUDI OF AMERICA, LLC

-- Using both hands, pull the seat cushion upward with force in direction of -arrow A- to release the seat cushion from the mount -1-.

-- Repeat the procedure on the other side of the seat cushion in direction of -arrow B-.

-- Tilt the seat cushion upward and disengage at the back of the seat frame.

-- Remove the seat cushion.