Cover And Cushion, Removing And Installing, A3 Backrest Cushion: Installing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Flip the protective strip -1- over 180° toward the inside in direction of -arrow A-.
-- Engage the protective strip in the groove on the backrest frame in direction of -arrow B-.
- After installing, make sure the cover is free of folds.