Seat Belt Height Adjuster, Removing And Installing: Removing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the seat belt height adjuster slider to the lowest position.
-- Detach the B-pillar upper trim panel (refer to B-PILLAR UPPER TRIM PANEL, REMOVING AND INSTALLING ) and move to the side with the seat belt.
-- Remove the bolt -4-.
-- Remove the seat belt relay -1- together with the seat belt.
-- Remove the bolt -3-.
-- Remove the seat belt height adjuster -2- upward from the B-pillar.